SSHSSH3

SSH

SSH is a grain conveyor with an electric motor and an adjustable angle of inclination. The angle of inclination and height ban be changed with the help of a winch. The auger is made of 2 mm thick steel, covered with corrosion-resistant paint, and the parts of the auger are up to 2.5 m long and connected by bolts (no intermediate supports). The receiving bunker has an aperture of 1000x1000 m, with a height of 700-900 mm. It is also possible to install a 2500x1200 mm bunker.
Possible lengths, capacities, and gauges of the auger for different angles are given in the table below, where H1, H2 and H3 is the height of the grain conveyor from the ground, and S1, S2 and S3 is the length from the support wheels to the top of the pipe.

RSH2RSH

RSH-200/4,5 and RSH-250/4,5

RSH is a grain conveyor fitted to the rear tailgate, designed for reloading grains, mineral fertilizers and dried fodder. The set includes a folding auger, an attachment to the trailer hinge and a 1200 mm long PVC pipe

ModelRSH-200/4,5RSH-250/4,5
Conveyor length, mm4 5004 500
Diameter, mm200250
Capacity, t/h3660
Angle0-60º
Achieving work positionmechanical
Hydraulic motorG-rotor type
GRSH2GRSH3

GRSH-300/4,5

GRSH is a hydraulically positioned grain conveyor attached to the rear of a trailer or box. GRSH is intended for reloading grains, mineral fertilizers and dried fodder.

Conveyor length, mm4 500
Diameter, mm300
Screw thickness, mm3
Capacity, t/h60
Achieving work positionhydraulically
NBSH2NBSH1

NBSH-250/4

The NBSH is a conveyor belt that can be attatched to the frames of side dump trailers - by tilting the trailer, the conveyor’s position does not change. The conveyor is coated with an anti-corrosion paint and a single steel sheet is used to form the screw. The conveyor is driven by the truck’s hydraulic system and a hydraulic motor and, in the transport position, the conveyor is located in the truck's box and the conveyor’s holding device on the side of the box. The set includes a frame mount, a hydraulic holder and 2 directional hosepipes.

Conveyor length, mm4 000
Diameter, mm250 (200)
Capacity, t/h60
Steel thickness, mm2
Hydraulic motorG-rotor type
PuhtijaPuhtija2

Seed treater

The seed treater is a trailer attachment that allows seeds to be treated with different chemicals. The screw is rolled and has a working life of at least 50,000 tons. Depending on the angle of inclination, the device has a capacity of 200-600 kg / min (12-36 t / h); the angle of inclination (0-60º) is changed by a winch. The chemical tank is 100 liters and made of stainless steel.

Conveyor length, mm4 500
Diameter, mm220
Screw thickness, mm2,5-5
Hydraulic motorG-rotor type
Tigu1Tigu2

CH-250/8,5 and CH-32

The belt conveyor is intended for loading grain and granular fertilizer. The wheels of the device frame can be hydraulically rotated 90º. Optional accessories include a cardan for the CH-250 / 8.5; towing hitch for transport or working position, hydraulic lifting of the pipe.

ModelCH-250/8,5CH-32
Conveyor length, m8,534,5
Tube diameter, mm250350
Capacity, t/h60-90300
Discharging height, m3,154,8-16
Belt width, mm420500
Wheels10/75 R15,314,0/65 R16
Support wheels165/70 R13
Track, m2,56,0
Receiving bunker, m2,0x1,51,5x1,5
Total weight, kg6000
Power sourcePTO37 kW electric motor
NK1502NK150

NK-150

The NK-150 loader is intended for the cleaning of low industrial buildings and warehouses - the material loaded is pushed into a collector with a plow and the conveyor carries it onto a trailer or truck box. The device has 2 electric reducers (7.5 and 5.5 kW) and the discharging height (1820 - 3300 mm) is adjusted hydraulically.

Length, mm14 372
Width, mm2 541
Conveyor belt width, mm500
Height, mm4 206
Box height, mm3 470
Bunker width, mm2 500
Bunker length, mm3 000
Support wheels11,5/80 R15,3
Power, t/h150
Unloading weight, kg3 450